Skip to main content

Making a House

The Project:
Over the past few weeks in e-comm we have been making houses in google sketch-up. Our goal was to make a house based on a house we found on https://www.houseplans.com. Then we were supposed to make a basic cube based on the floor plans of our house. After making the basis we were to add the details using the tools on google sketch-up to make our house as similar to house on https://www.houseplans.com.

What I Learned:
During this project I learned about google sketch-up. First we learned the two ways to make things, to add or cut out, practicing by making chairs. We learned that the three basic tools of sketch-up are orbit, pan, and zoom. After learning the basics we started on our houses. Making our houses we also used the push/pull, rectangle, and paint tools.

How it Went:
Overall this project went very well. At first it was difficult to use sketch-up, but after practicing by making chairs and watching tutorials it got much easier. Making a house was very fun.

Comments

Post a Comment

Popular posts from this blog

Making a Logo

The Process: Over the past few weeks we have been making are own logos. We started out by making sketches using our name. we made many different sketches then we narrowed it down to three. we then took those three logos and put them into adobe illustrator. Once in adobe illustrator we made different combinations of each logo. after we choose a final design in black and white we made different color combinations.    Why I choose this logo: I choose this logo because it was simple and complex at the same time. I liked the colors grey and back because the are neutral colors and could go well on anything The font I chose is very cute an happy for the Ava Clayton. The font I use fro the C was very simple and serious.
Post a Comment
Read more

Music Video

• Embed your work at the top of your blog post under your Title. These past few weeks in video we worked on recreating the Bet on It video from High School Musical 2. As a group we thought this video would be really fun to create and challenging in many ways. We also had a good idea for locations already so we thought it would be do able. We started with pre-production by dividing up the work to be efficient and effective because we wanted to have as much times as we could to film. We also decided Alex was going to act, Josh and Drew we going to mainly do the camera, and Maleah and I were going to help with choreography and making sure the video and our filming was the same and there wasn't anything weird going on. After we had footage we all edited together since we couldn't have everyone at the same time, so we had one person run editing and everyone else helping and we rotated the main editor. As a group I think we worked together really well and dealt with the issues w...
Post a Comment
Read more

Printing Processes

Relief Printing:  Relief Printing is a  printing process where the surface faces of the paint block are inked; empty areas are ink free. Printing the image is a simple task in inking the face of the block, making it contrast more with the paper. 1.) Prep your block, you can tone it using Indian wash or jet black film ink. 2.) Place carbon paper transfer on tip of the block. 3.) Once the paper is transferred, you have the choice of what kind of composition you want to have which will have a impact on what tool you decide to press with. 4.) Roll in over the surface of the block, then place it on the press where it is past through transferring ink to paper.  Intaglio Printing: Intaglio printing is any print making process when the image area is below the flat surface of the printing plate. The design is cut, scratched, or etched into the plate.  1.) Prepare the plate by polishing and cleaning it so that there are no scratches or marks that coul...
Post a Comment
Read more